Publications - Dr. Mohamed S. Hamed

2026

1 Ravi Peri, Ahmed M. Teamah, Xiaochun Zeng, and Mohamed Hamed, "Unidirectional axial solidification experiments of cast aluminium alloys, AlZn5Mg1-Fe1.2 and AlSi7Mg0.3 alloys (w%) - prediction of transient mushy zone temperature field", Canadian Metallurgical Quarterly, May 2026.

2025

2 Ravi Peri, Ahmed M. Teamah, Xiaochun Zeng, et al., Sumanth Shankar, "Axial Solidification Experiments to Mimic Net-Shaped Castings of Aluminum Alloys - Interfacial Heat-Transfer Coefficient and Thermal Diffusivity", Processes, December 2025.

3 Remon Basily, Ahmed M. Teamah, Mohamed Hamed, and Sumanth Shankar, "Estimation of Thermophysical Properties as Functions of Temperature in Rapid Radial Solidification of Metallic Alloys", Processes, December 2025.

4 Abdelfatah M. Teamah, Ahmed M. Teamah, Mohamed Hamed, and Sumanth Shankar, "Experimental and Numerical Replication of Thermal Conditions in High-Pressure Die-Casting Process", Processes, November 2025.

5 Abdelfatah M. Teamah, Ahmed M. Teamah, M.S. Hamed, and S. Shankar, "On Replicating Thermal Conditions in High Pressure Die Casting Processes", 17th International Conference on Thermal Engineering and Applications (ICTEA-2025), Bucharest, Romania, June 2025.

6 Mefreh, M., Ahmed M. Teamah, S. Shankar, and M.S. Hamed, "On the Determination of Thermophysical Properties of Casting Alloys", 17th International Conference on Thermal Engineering and Applications (ICTEA-2025), Bucharest, Romania, June 2025.

7 Peri, R.K., Ahmed M. Teamah, M.S. Hamed, and S. Shankar, "Characterization of Structural Aluminum Alloys in Unidirectional Axial Solidification", 17th International Conference on Thermal Engineering and Applications (ICTEA-2025), Bucharest, Romania, June 2025.

2024

8 Mohamed S. Hamed, "Transport Phenomena In Thermal Systems", 15th International Conference on Thermal Engineering (ICTEA'24), Tashkent, Uzbekistan, 2024. Keynote Lecture

9 Basily, R., Ahmed M. Teamah, M. Hamed, and S. Shankar, "Estimation of Thermo-physical Properties of Metallic Alloys", 16th International Conference on Thermal Engineering and Applications (ICTEA-2024), Tashkent, Uzbekistan, May 2024.

10 Ahmed M. Teamah, M. Hamed, and S. Shankar, "Shot Sleeve Profile in High Pressure Die Casting", 16th International Conference on Thermal Engineering and Applications (ICTEA-2024), Tashkent, Uzbekistan, May 2024.

11 Ahmed M. Teamah and Mohamed Hamed, "Numerical and experimental study of a multiphase flow inside a self-contained drum motor drive system", International Journal of Thermal Sciences, January 2024.

2023

12 Ahmed M. Teamah and Mohamed Hamed, "Numerical and Experimental Study of The Viscous Dissipation of Oil inside the Electric Motor's Gap", Journal of Fluid Flow, Heat and Mass Transfer, August 2023.

13 Teamah, A, Hamed, M., "Experimental Study of A Multiphase Taylor-Couette Flow", Proceedings of IHTC-17, The 17th International Heat Transfer Conference, Cape Town, South Africa, 2023.

14 Teamah, A; Hamed, M., "Viscous Dissipation Inside Electric Motors", Proceedings of FFHMT'23, The 10th International Conference on Fluid Flow, Heat and Mass Transfer, Niagara Falls, Canada, 2023.

15 Teamah, A; Hamed, M., "Heat Transfer Enhancement of a Taylor-Couette Flow", Proceedings of ICTEA14, The 4th International Conference on Thermal Engineering: Theory and Applications, Yalova, Turkey, 2023.

16 Teamah, A, Hamed, M., "Cooling of a Synchronous Electric Motor Using An Axial Air Flow", International Journal of Thermofluids, 2023.

17 Orji, C. et al., "Effects of Fe, Zn and Mg content on the Natural Ageing Kinetics of Al-Fe (Zn, Mg) Alloy Castings for Structural Automotive Application", CIM Journal, 2023.

2022

18 Chimaobi, O; Lombardi, A; Byczynski, G; Hamed, M; Shankar, S., "Natural Ageing of Al-Fe (Zn, Mg) Alloy Castings for Structural Automotive Application", Proceedings of COM 2022, The 61st Annual Conference of Metallurgists, Montreal, Canada, August 2022. 🏆 Light Metals Best Paper Award

19 Teamah, A; Hamed, M., "Heat Transfer Inside an Electric Motor", The 9th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT'22), Niagara Falls, Canada, June 2022. 🏆 Best Paper Award

20 Teamah, A; Hamed, M., "Thermal Performance of a Gearbox", The 13th International Conference on Thermal Engineering, Baku, Azerbaijan, May 2022.

21 Wang, H., Shankar, S., and Hamed, M.S., "Solidification Simulation of Al-Si Alloys with Dendrite Tip Undercooling", Metals, 12, 608, 2022 (32 pages).

22 Teamah, A; Hamed, M., "Numerical Investigation of Thermal Losses within an Internal Gear Train Submerged in a Multiphase Flow and Enclosed in a Rotating Casing", International Journal of Thermofluids, 15(100188): 1–9, 2022.

23 Nadeem, S; Bosca, P; Stramenga, M; Casella, J.; Coppens, J.; Henriques, J; Wynn, G.; Hamed, M., "An experimental investigation of slat-screens to mitigate fluid sloshing in microgravity", Space Safety Engineering, 9, pp. 319–327, 2022.

24 Teamah, A, M; Hamed, M., "Numerical Study of Electric Motors Cooling Using an Axial Air Flow", Journal of Fluid Flow, Heat and Mass Transfer, 9, pp. 101–105, 2022.

25 Teamah, A.M., Hamed, M.S., "Investigation of transient multiphase Taylor-Couette flow", Alexandria Engineering Journal, 61: 2723–2738, 2022.

2021

26 Takrouri, K.J., Luxat, J.C., Hamed, M.S., "Rewetting Delay Time During Jet Impingement Quench Cooling of Hot Curved Surfaces", Nuclear Technology, 2021. https://doi.org/10.1080/00295450.2021.1935164

27 Ahmed Teamah and Mohamed Hamed, "Investigation of Transient Multiphase Taylor-Couette Flow", Alexandria Engineering Journal, 2021.

28 Mahmoud Abdelfattah and Mohamed Hamed, Book Chapter: "Spring Quenching", ASM Handbook of Quenchants, Second Edition, Editor G. Totten, 2021.

29 Mahmoud Abdelfattah and Mohamed Hamed, "On Jet Impingement Boiling Heat Transfer", 8th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT'21), May 21–23, 2021, Virtual.

30 Ahmed Teamah and Mohamed Hamed, "Flow and Heat Transfer inside a Rotating Annular Space", ICHMT International Symposium on Advances in Computational Heat Transfer, August 15–19, 2021, Virtual.

31 Gurpyar Dhadda, Mohamed Hamed, and Philip Koshy, "Electrical discharge surface texturing for enhanced pool boiling heat transfer", Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117083

2019

32 Alzamil A, Hamed M., "Prediction of thermal buffer zone effectiveness in real-size buildings - An experimental and analytical study", Int. J. Energy Res., 2019; 43:5284–5300. https://doi.org/10.1002/er.4519

33 Mohamed Hamed, "Towards Net-Zero Energy Buildings - Integration of Renewable Energy Sources in Buildings", The 3rd International Conference on Energy Research and Technology (ICERT'19), Lisbon, Portugal, August 18–20, 2019. Keynote Lecture

34 Gurpyar Dhadda, Mohamed Hamed, Philip Koshy, "Boiling Heat Transfer Enhancement Using Engineered Surfaces", 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19), Lisbon, Portugal, August 15–18, 2019.

2018

35 Hongda Wang, Mohamed S. Hamed, and Sumanth Shankar, "Interaction between primary dendrite arm spacing and velocity of fluid flow during solidification of Al–Si binary alloys", Journal of Materials Science, Vol. 53, no. 13, 2018, pp. 9771–9789.

36 A. M. Al-Mansour, M. S. Hamed, "Effectiveness of Thermal Buffer Zone In Buildings", 7th Global Conference on Global Warming (GCGW-2018), June 24–28, 2018, Izmir, Turkey.

37 Mohamed S. Hamed, "Jet Impingement Boiling Heat Transfer - A Complex and Effective Phenomenon", 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18), Madrid, Spain, August 16–18, 2018. Keynote Lecture

2017

38 Morteza Marivani and Mohamed Hamed, "Evaluate Pressure Drop of Slat Screen in an Oscillating Fluid in a Tuned Liquid Damper", Computers and Fluids, 156 (2017) 384–401.

39 Kifah Takrouri, John Luxat and Mohamed Hamed, "Measurement and Analysis of the Re-wetting Front Velocity during Quench Cooling of Hot Horizontal Tubes", Nuclear Engineering and Design, 311 (2017) 184–198.

40 Kifah Takrouri, John Luxat and Mohamed Hamed, "Experimental Investigation of Quench and Re-wetting Temperatures of Hot Horizontal Tubes Well above the Limiting Temperature for Solid–Liquid Contact", Nuclear Engineering and Design, 311 (2017) 167–183.

41 Mohamed S. Hamed, "The Use of Renewable Energy in New and Existing Buildings", International 100% Renewable Energy Conference, May 18–20, 2017, Istanbul, Turkey. Keynote Lecture

42 Mohamed S. Hamed, "Energy Optimization of the Thermal Processing Industry", International Conference on Energy and Thermal Engineering, 25–28 April 2017, Istanbul, Turkey. Keynote Lecture

2016

43 Hassan, A. A. and Hamed, M. S., "Modeling Effective Thermal Conductivity of Randomly Distributed Loads of Mono-Sized Parts of Arbitrary Geometry", Materials Performance and Characterization, Vol. 5, No. 1, 2016, pp. 1–16, doi:10.1520/MPC20150031.

44 Omar, A.M.T., Hamed, M.S., "Modeling of bubble growth under an impinging free planar water jet", ASME Journal of Heat Transfer Engineering, Vol. 37, Issue 18, 2016.

45 Ahmed A.B. and Hamed M.S., "Bubble Dynamics Under an Impinging Jet", 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, July 11–13, 2016, Malaga, Spain.

46 Hamda M. and Hamed M.S., "Bubble Dynamics In Pool Boiling of Nanofluids", 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, July 11–13, 2016, Malaga, Spain.

2015

47 Ahmed, A.B. and Hamed, M.S., "Modeling of transition boiling under an impinging water jet", International Journal of Heat and Mass Transfer, Vol. 91, pp. 1273–1282, 2015.

48 Ahmed, A. and Hamed, M.S., "Experimental investigation of boiling under planar impingement jet", 9th International Conference on Boiling and Condensation Heat Transfer, April 26–30, 2015, Boulder, Colorado, USA.

49 Almalki, N.A., Hamda, H. and Hamed, M.S., "On The Effect of Initial Surface Condition on Pool Boiling of Nanofluids", 9th International Conference on Boiling and Condensation Heat Transfer, April 26–30, 2015, Boulder, Colorado, USA.

2014

50 Marivani, M. and Hamed, M.S., "Numerical Study of Slat Screen Pattern Effect on Design Parameters of TLD", ASME Journal of Fluids Engineering, Vol. 136, 061201, 2014.

51 Jan, A., Hamed, M.S., Razaqpur, A., and Foo, S., "Investigation of The Use of Solar Thermal Buffer Zone in Buildings", Chapter 80, Progress in Exergy, Energy, and the Environment, DOI 10.1007/978-3-319-04681-5_80, Springer, 2014.

52 Ahmed, A. and Hamed, M.S., "Bubble Dynamics Under An Impinging Planar Water Jet", 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, July 14–16, 2014, Orlando, Florida, USA. 🏆 Outstanding Paper Award

53 Oda, T. F., Hamed M.S., and Ghani, S., "Numerical Study of the Effect of Liquid Sloshing Inside TLD on Suppression of Gust Wind-Induced Vibration in High Rise Buildings", 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, July 14–16, 2014, Orlando, Florida, USA.

2013

54 Ahmed, A. and Hamed, M.S., "Water Quenching Heat Transfer", ASM Handbook, Volume 4A, Steel Heat Treating Fundamentals and Processes, J. Dossett and G.E. Totten, editors, ASM International Press, 2013.

55 Omar, Ahmed M.T. and Hamed, M.S., "A Mechanistic Wall Heat Flux Partitioning Model of Nucleate Boiling Under Impinging Jets", Smart and Green Interfaces ECOST Workshop, Prague, Czech Republic, March 21–22, 2013. Key Note Presentation

56 Jan, A., Hamed, M.S., Razaqpur, A., and Foo, S., "Investigation of The Use of Solar Thermal Buffer Zone in Buildings", Sixth International Exergy, Energy, and Environment Symposium, July 1–4, 2013, Rize, Turkey.

57 Oda, T. F., Hamed M.S., and Ghani, S., "On the Damping of Wind-Induced Vibration in Tall Buildings", 4th International Conference on Civil, Structural and Environmental Engineering Computing, Sept 3–6, 2013, Cagliari, Sardinia, Italy.

2012

58 Ahmed, O. and Hamed, M.S., "Effects of Acid Addition on The Heat Transfer of Nanofluids Pool Boiling", Heat Transfer Engineering, 33(14):1148–1155, 2012.

59 Ahmed, O. and Hamed, M.S., "Effect of Nanoparticle Deposition on Pool Boiling of Nanofluids", International Journal of Heat and Mass Transfer, 55, 3423–3436, 2012.

60 Hassan, A., Baraich, H., Hamed, M.S., and Abdel-Hady, A., "Effect of Surface Condition on Pool Boiling of Nanofluids", 8th ECI International Conference on Boiling and Condensation, Lausanne, Switzerland, June 3–7, 2012.

61 Oda, T., Hamed, M.S., and Ghani, S., "On Wave Breaking inside Tuned Liquid Dampers", 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta, July 16–18, 2012. 🏆 Outstanding Paper Award

2011

62 Hassan, A. and Hamed, M.S., "Modeling of heat treatment of randomly distributed loads in multi-zone continuous furnaces", 7th International conference on advanced materials – THERMEC 2011, Quebec City, Canada, August 1–5, 2011. Invited Presentation

63 Takrouri, K., Luxat, J. and Hamed, M.S., "Experimental investigation of quench phenomena and two-phase flow behavior for hot horizontal tubes well above the limiting temperature for solid–liquid contact", 14th International Topical Meeting on Nuclear Reactor Thermal hydraulics, NURETH-14, Toronto, Ontario, Canada, September 25–30, 2011.

64 Takrouri, K., Luxat, J. and Hamed, M.S., "Experimental investigation of re-wetting of hot horizontal tubes", 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Mauritius, July 11–13, 2011. 🏆 Best Paper Award

65 Jeyakumar, M., Ahmed, O., Shankar, S., Hamed, M.S., "Heat Transfer Coefficient and Viscosity of Alumina-water Nanofluids", 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Mauritius, July 11–13, 2011.

2010

66 Hassan, A. and Hamed, M.S., "Towards Achieving Vision 2020 Goals of the Heat Treating Industry", Journal of Minerals, Metals, and Materials Society (TMS), Vol. 62 No. 9, pp. 55–59, 2010.

67 Malik, M.M., Jeyakumar, M., Hamed, M. S., Walker, M. J., Shankar, S., "Rotational Rheometry of Liquid Metal Systems: Measurement Geometry Selection and Flow Curve Analysis", Journal of Non-Newtonian Fluid Mechanics, 165, pp. 733–742, 2010.

68 M. Marivani and Hamed, M.S., "Numerical Modeling of Sloshing Motion in a Tuned Liquid Damper Outfitted with a Submerged Slat Screen", Int. Journal of Numerical Methods in Fluids, DOI: 10.1002/fld.2216, 22 pages, 2010.

69 Jeyakumar, M., Hamed, M.S. and Shankar, S., "Rheology of Liquid Metals and Alloys", Journal of Non-Newtonian Fluid Mechanics, doi:10.1016/j.jnnfm.2011.04.014, 8 pages, 2010.

70 Wang, H., Shankar, S., and Hamed, M.S., "Optimization of Material Properties in Solidification Simulation of Al-Si Binary Alloy", Metallurgical Transactions A, doi: 10.1007/s11661-011-0617-z, 15 pages, 2010.

71 Wang, H., Shankar, S., and Hamed, M.S., "Effect of Shrinkage on Primary Dendrite Arm Spacing During Binary Al-Si Alloy Solidification", Metallurgical Transactions A, doi: 10.1007/s11661-011-0611-5, 9 pages, 2010.

72 Friedrich, K., Hamed, M. S., Razaqpur, G., and Foo, S., "Achieving Sustainable Energy Savings Using Solar Airflow Windows", 10th International Conference for Enhanced Building Operations, Kuwait, October 26–28, 2010.

73 Amir H. Nobari; Vladan Prodanovic; Mohamed S. Hamed; Mary Wells; Matthias Militzer, "Thermal Behavior of a Hot Moving Steel Plate during Jet Impingement Cooling", Materials Science & Technology 2010 Conference & Exhibition, Houston, Texas, October 17–21, 2010.

74 Ahmed, O. and Hamed, M.S., "On Pool Boiling of Nanofluids", 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Antalya, Turkey, July 19–21, 2010. 🏆 Best Paper Award

75 Ahmed, O. and Hamed, M.S., "Effect of Experimental Techniques on the Pool Boiling of Nanofluids", International Conference on Multiphase Flow, ICMF-2010, Tampa, FL, USA, May 30–June 4, 2010.

2009

76 Omar, A.M.T., Hamed, M.S., and Shoukri, M., "Modelling of nucleate boiling heat transfer under an impinging free jet", International Journal of Heat and Mass Transfer, Volume 52, Issue 23–24, pp. 5557–5566, 2009.

77 M. Marivani and M.S. Hamed, "Numerical Simulation of Structure Response Outfitted with a Tuned Liquid Damper", Journal of Computers and Structures, Volume 87, Issues 17–18, pp. 1154–1165, 2009.

78 Home, D., Lightstone, M.F., and Hamed, M.S., "Validation of DES-SST based turbulence model for a fully developed turbulent channel flow problem", Numerical Heat Transfer, Part A: Applications, Volume 55, Issue 4, pp. 337–361, 2009.

79 Home, D., Arvanitis, G., Lightstone, M.F., and Hamed, M.S., "Simulation of flow pulsations in a twin rectangular subchannel geometry using unsteady Reynolds averaged Navier-Stokes modelling", Nuclear Engineering and Design, 239, pp. 2964–2980, 2009.

80 Morsy, H., Marivani, M. and Hamed, M.S., "On the Dynamic Response of Structures Equipped with Tuned Liquid Dampers", 4th International Conference on Thermal Engineering Theory and Applications, Abu Dhabi, UAE, January 12–14, 2009.

81 Omar, A.M.T., Hamed, M.S., and Shoukri, M., "Prediction of Wall Heat Flux to an Impinging Free Liquid Jet Using the Concept of Wall Flux Partitioning", 4th International Conference on Thermal Engineering Theory and Applications, Abu Dhabi, UAE, January 12–14, 2009.

82 Omar, A.M.T., Hamed, M.S., Shoukri, M., "On the Bubble Dynamics Under an Impinging Free Planar Jet", 7th ECI International Conference on Boiling Heat Transfer, Florianopolis, SC, Brazil, May 3–7, 2009.

83 Srirangam, S.P., Malik, M.M., Jeyakumar, M., Walker, M., Hamed, M.S., Shankar, S., "Effect of Strontium on Viscosity and Liquid Structure of Al-Si Eutectic Alloy", TMS Annual Meeting & Exhibition, San Francisco, California, February 15–19, 2009.

84 Morsy, H., Marivani, M. and Hamed, M.S., "On the Dynamic Response of Structures Equipped with Tuned Liquid Dampers", 4th International Conference on Thermal Engineering Theory and Applications, Abu Dhabi, UAE, January 12–14, 2009.

85 Takrouri, K., Luxat, J., Hassan, A., and Hamed, M.S., "Heat Transfer and Two-Phase Flow Behaviour during Quench of Hot Horizontal Cylindrical Tubes", 4th International Conference on Thermal Engineering Theory and Applications, Abu Dhabi, UAE, January 12–14, 2009.

86 Jeyakumar, M., Mousa, M., Hamed, M.S., Shankar, S., "Heat Treatment of A356.2 Aluminum Alloy: Effect of Quench Rate and Natural Ageing", TMS Annual Meeting & Exhibition, San Francisco, California, February 15–19, 2009.

2008

87 Akmal, M., Omar, A.M.T. and Hamed, M.S., "Experimental Investigation of Propagation of Wetting Front on Curved Surfaces Exposed to an Impinging Water Jet", International Journal of Microstructure and Materials Properties (IJMMP), Vol. 3, No. 2/3, 2008.

88 Hassan, A. and Hamed, M.S., "Optimization of Energy Utilization and Productivity of Heat Treating Batch-Type Furnaces", Journal of ASTM International, Vol. 5, No. 1, 2008.

89 Elsaadawy, E., Mortazavi, H. and Hamed, M.S., "Turbulence Modeling of Forced Convection Heat Transfer in Two-Dimensional Ribbed Channels", ASME Journal of Electronic Packaging, Vol. 130, pp. 031011-1 to -17, September 2008.

90 Ali, S., Hamed, M.S., and Lightstone, M.F., "Numerical study of the modeling error in the online input estimation algorithm used for inverse heat conduction problems (IHCPs)", Journal of Physics: Conference Series, 135, 2008.

91 Ali, S., Hamed, M.S., and Lightstone, M.F., "Numerical study of the modelling error in the online input estimation algorithm used for inverse heat conduction problems", Journal of Physics: Conference Series, v 135, p 012004 (8 pp.), 2008.

92 Ali, S., Hamed, M.S., and Lightstone, M.F., "An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods", Journal of ASTM International, Volume 5, Issue 10, November 2008.

93 Home, D., Lightstone, M.F., and Hamed, M.S., "Numerical investigation of turbulent flow in a twin rectangular sub-channel geometry", 32nd CNS Annual Conference, Toronto, June 1–4, 2008.

94 S.K. Ali, M.S. Hamed, and M.F. Lightstone, "Numerical study of the modeling error in the online input estimation algorithm used for inverse heat conduction problems", 6th International Conference on Inverse Problems in Engineering: Theory and Practice, Dourdan (Paris), France, June 15–19, 2008.

95 Hongda Wang, M.S. Hamed, and S. Shankar, "Effect of Shrinkage on Al–Si Alloy Solidification", Computational Heat Transfer–CH08 Conference, Marrakech, Morocco, May 11–16, 2008.

2007

96 Home, D., Lightstone, M.F., and Hamed, M.S., "Detached Eddy Simulation Based Turbulence Modeling Approach for Inter Sub-Channel Thermal Mixing", 12th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-12), Pittsburgh, Pennsylvania, September 30–October 4, 2007.

97 Omar, M.T., Hamed, M.S., and Shoukri, M., "Experimental Study of Steady State Nucleate Boiling Heat Transfer Under Planar Jet Impingement", NURETH-12, Pittsburgh, Pennsylvania, September 30–October 4, 2007.

98 Khafagy, A.E., Chuang, D., Schweitzer, J., and Hamed, M.S., "Two-Phase Flow inside Automotive Torque Converters", International Conference on Multiphase Flow, ICMF 2007, Leipzig, Germany, July 9–13, 2007.

99 Omar, M.T., Hamed, M.S., Shoukri, M., "Nucleate Boiling Heat Transfer under Liquid Jet Impingement", ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, BC, Canada, July 8–12, 2007.

100 Wang, H., Shankar, S., and Hamed, M.S., "Numerical model for binary alloy solidification", 5th International Conference on Computational Heat and Mass Transfer (ICCHMT), Canmore, Alberta, Canada, June 18–22, 2007.

101 Hassan, A., Curtis, C., Hamed, M.S., and Shoukri, M., "How to Load a Batch-Type Furnace", TMS 2007 Annual Meeting, February 25–March 1, Orlando, Florida, 2007.

102 Malik, M.M., Lambotte, G., Hamed, M.S., Chartrand, P., and Shankar, S., "How to measure viscosity of liquid aluminum alloys", TMS 2007 Annual Meeting, February 25–March 1, Orlando, Florida, 2007.

2006

103 Wang, H. and Hamed, M.S., "Flow Mode-transition of Natural Convection in Inclined Rectangular Enclosures Subjected to Bidirectional Temperature Gradients", Int. Journal of Thermal Sciences, Vol. 45, pp. 782–795, 2006.

2005

104 Siddique, M.R., Hamed, M.S., and El Damatty, A.A., "A nonlinear numerical model for sloshing motion in tuned liquid dampers", Int. Journal of Numerical Methods in Heat and Fluid Flow, Vol. 15, No. 3, pp. 306–324, 2005.

105 Hamed, M.S. and Akmal, M., "Determination of Heat Transfer Rates in Industry-Like Spray Quench System with Multiple Impinging Water Jets", Int. J. of Materials & Production Technology (IJMPT), Vol. 24, pp. 184–198, 2005.

106 Wang, H. and Hamed, M.S., "Flow mode-transition of natural convection in inclined complex enclosures", WIT Transactions on Modeling and Simulation, Vol. 41, 2005.

107 Wang, H. and Hamed, M.S., "Flow mode-transition of natural convection in inclined complex enclosures", 12th International Conference on Computational Methods and Experimental Measurements, CMEM05, Malta, June 20–22, 2005.

2004

108 Chen, Y., Brooks, G., Nightingale, S., Coley, K., and Hamed, M., "Marangoni effect in refractory slag line dissolution", 4th Int. Symposium on Advances in Refractories for the Metallurgical Industries, 43rd Annual Conference of Metallurgists of CIM, Hamilton, Ontario, August 22–24, 2004.

109 Wang, H. and Hamed, M.S., "Effect of side wall thermal conditions on natural convection in inclined enclosures", 12th Annual Conference of the CFD Society of Canada, Ottawa, Ontario, May 9–12, 2004. 🏆 First Prize - Student Paper Competition (29 entries)

2000

110 Hamed, M. S. and J. M. Floryan, "Marangoni convection - the case of a cavity subject to point heating", Journal of Fluid Mechanics, Vol. 405, pp. 79–110, 2000.

111 Hamed, M. S. and J. M. Floryan, "Marangoni convection - the case of a cavity with differentially heated side walls", Journal of Fluid Mechanics, Vol. 405, pp. 111–129, 2000.

1998

112 Hamed, M. S. and J. M. Floryan, "Numerical simulation of unsteady non-isothermal capillary interfaces", Journal of Computational Physics, Vol. 145, pp. 110–140, 1998.