Injury Biomechanics Lab

Book Chapter:

Quenneville CE. (2016) Impact Test Methods, in Experimental Methods in Orthopaedic Biomechanics, Zdero R (Ed.), pp. 3-17, Elsevier Publishing, London, UK.

Journal Articles:
Acharya I, Van Tuyl JT, Quenneville CE. A Force-Sensing Insole to Quantify Impact Loading to the Foot. Submitted to Journal of Biomechanical Engineering (July 2017).

Amuno S, Al-kaissi A, Jamwal A, Niyogi S, Quenneville CE. Chronic Arsenicosis in Wild Snowshoe Hares (Lepus Americanus) Breeding Near Yellowknife, Northwest Territories (Canada), Part 2: Manifestation of Bone Abnormalities and Osteoporosis.  Submitted to Science of the Total Environment (Jun 2017).

Martinez AA, Chakravarty AB, Quenneville CE. The Effect of Impulse on the Axial Fracture Tolerance of the Isolated Tibia During Automotive and Military Impacts. Submitted to Journal of the Mechanical Behavior of Biomedical Materials (Jun 2017).

Smolen C and Quenneville CE. (2017) Loading Through a Finite Element Model of the Foot and Ankle in Various Postures. Annals of Biomedical Engineering 45(8) 1993-2008.

Chakravarty AB, Martinez AA, Quenneville CE. (2017) The Injury Tolerance of the Tibia Under Off-Axis Impact Loading.  Annals of Biomedical Engineering 45(6) 1534-1542.

Quenneville CE, Fournier E, Shewchenko N. The Effect of ATD Lower Leg Surrogate Selection on Impact Mitigating System Evaluation in Low and High-Rate Loading Conditions.  Military Medicine (accepted Mar. 2017).

Smolen C and Quenneville CE. (2016) The Effect of Ankle Posture on the Load Path Through the Hindfoot. Proceedings of the IMechE Part H: Journal of Engineering in Medicine, 230(11):1024-35.

Vijayakumar V, Quenneville CE. (2016) The Regional Variations in the Mechanical Properties of Cancellous Bone of the Proximal Tibia Using Indentation Testing and CT Imaging, Proceedings of the IMechE Part H: Journal of Engineering in Medicine, 230(6):588-93.

Van Tuyl J, Burkhart TA, Quenneville CE. (2016) The Effect of Posture on Forces and Moments Measured in a Hybrid III ATD Lower Leg.  Traffic Injury Prevention, 17(4):381-5.

Muizelaar A, Winemaker MJ, Quenneville CE, Wohl GR. (2015) A Novel Bilateral Plating Technique for Treating Periprosthetic Fractures of the Distal Femur. Clinical Biomechanics 30(9):921-6.  http://dx.doi.org/10.1016/j.clinbiomech.2015.07.008

Burkhart TA, Quenneville CE, Dunning CE, Andrews DM. (2014) Development and validation of a distal radius finite element model to simulate impact loading indicative of a forward fall. Proceedings of the IMechE Part H: Journal of Engineering in Medicine, 228(3):258-271.


Proceedings of Meetings:
Chakravarty A, Nguyen P, Wohl G, Grandfield K, Quenneville C. (2016) The Effect of Room Temperature Drying on the Mechanical Response of Bone.  19th Biennial Meeting of the Canadian Society for Biomechanics, Hamilton, ON.

Chakravarty A, Martinez A, Quenneville C. (2016) The Effect of Occupant Posture on the Risk of Fracture in the Human Tibia Under Dynamic Impact Loading.  19th Biennial Meeting of the Canadian Society for Biomechanics, Hamilton, ON.

Martinez A, Chakravarty A, Quenneville C. (2016) The Effect of Impulse and Impact Duration on the Axial Fracture Tolerance of the Isolated Tibia.  19th Biennial Meeting of the Canadian Society for Biomechanics, Hamilton, ON.

Martinez A and Quenneville CE. (2016) The Effect of Impulse on the Axial Fracture Tolerance Criteria of the Isolated Tibia During Automotive and Military Impacts.  11th Annual Injury Biomechanics Symposium, Columbus, OH.

Chakravarty A and Quenneville CE. (2016) The Effect of Occupant Posture on the Risk of Fracture in the Human Tibia Under Dynamic Impact Loading.  11th Annual Injury Biomechanics Symposium, Columbus, OH.

Smolen C and Quenneville CE. (2015) Quantifying the Effect of Ankle Posture on the Positions of Bones of the Foot/Ankle Complex.  11th Annual Injury Biomechanics Symposium, Columbus, OH.

Smolen C and Quenneville CE.  (2015)  A Finite Element Model of the Foot/Ankle to Evaluate Injury Risk in Various Postures.  Computer Methods in Biomechanics and Biomedical Engineering, Montreal, QC.

Vijayakumar V and Quenneville CE. (2015) Regional Variations in the Mechanical Properties of Cortical Bone of the Tibia as Determined Using Four Point Bending and CT Imaging. 49th Annual Canadian Orthopaedic Research Society Meeting, Vancouver, BC.

Shewchenko N, Fournier E and Quenneville CE. (2014) ATD Lower Leg Surrogate Selection and the Effects on the Evaluation of Blast Energy Attenuating Floor Mats. Personal Armor Systems Symposium, Cambridge, UK.  

Smolen C and Quenneville CE. (2014) Quantifying the Effect of Ankle Posture on the Positions of Bones of the Foot/Ankle Complex for Injury-Prediction Studies. 10th Annual Injury Biomechanics Symposium, Columbus, OH, May 2014.

Burkhart TA, Van Tuyl J, Quenneville CE, and Dunning CE. (2014) The Effect of Material Model, Element Formulation and Bone Marrow Inclusion on the Accuracy of Explicit Finite Element Models of the Radius and Tibia. 22nd Annual Symposium on Computational Methods in Orthopaedic Biomechanics, New Orleans, LA.

Quenneville CE. (2013) Lower Leg Injury Criteria and Surrogates. Human Injury Assessment in Vehicle Explosions Meeting, London, UK.

Vijayakumar V and Quenneville CE. (2013) Regional Variations in the Mechanical Properties of Cancellous Bone of the Tibia. 47th Annual Canadian Orthopaedic Research Society Meeting, Winnipeg, MB.

Van Tuyl J, Burkhart TA, and Quenneville CE (2013). The Effect of Ankle Posture on Forces and Moments in an Anthropomorphic Test Device Tibia During Impact Tests. 9th Annual Injury Biomechanics Symposium, Columbus, OH.

Burkhart TA, Quenneville CE, Dunning CE, and Andrews DM. (2012) Validation and Mesh Quality Assessment of a Distal Radius Finite Element Model to Simulate Forward Fall Impact Loading. 17th Biannual Meeting of the Canadian Society for Biomechanics, Vancouver, BC. Nominee: Young Investigator Award.

Muizelaar A, Winemaker M, Quenneville CE, Wohl GR. (2012) Prototype Development for Treatment of Periprosthetic Fractures of the Distal Femur. 46 th Annual Canadian Orthopaedic Research Society Meeting, Ottawa, ON.

Burkhart TA, Quenneville CE, Dunning CE, and Andrews DM. (2012) Development and Validation of a Distal Radius Finite Element Model to Simulate Dynamic Impact Loading. 20 th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, Berkeley, CA. Winner: Award for Best Paper.