PUBLICATIONS
1.
Alzamil A,
Hamed M., Prediction of thermal buffer zone effectiveness in
real‐size buildings—An experimental and analytical study. Int. J
Energy Res.,
2019;
43:5284–5300.
https://doi.org/10.1002/er.4519.
2.
Mohamed Hamed, “Towards Net-Zero Energy Buildings -
Integration of Renewable Energy Sources in Buildings”,
Keynote Lecture, The 3rd International Conference on
Energy Research and Technology (ICERT’19), Lisbon, Portugal –
August 18-20, 2019.
3.
Gurpyar Dhadda,
Mohamed Hamed, Philip Koshy, “Boiling Heat Transfer Enhancement
Using Engineered Surfaces”, The 5th World Congress on
Mechanical, Chemical, and Material Engineering (MCM'19), Lisbon,
Portugal – August 15-18, 2019.
4.
Hongda Wang,
Mohamed S. Hamed, and Sumanth Shankar, “Interaction between
primary dendrite arm spacing and velocity of fluid flow during
solidification of Al–Si binary alloys”, Journal of Materials
Science, Vol. 53, no., 13, 2018, pp.9771-9789.
5.
A.
M. Al-Mansour,
M. S. Hamed, Effectiveness of Thermal Buffer Zone In Buildings,
7th Global Conference on Global Warming (GCGW-2018), June 24-28,
2018, Izmir, Turkey.
6.
M.S. Hamed,
Jet Impingement Boiling Heat Transfer-A Complex and Effective
Phenomenon,
Keynote Lecture,
the 4th World Congress on Mechanical, Chemical, and Material
Engineering (MCM'18), Madrid, Spain – August 16 - 18, 2018.
7.
Morteza Marivani
and Mohamed Hamed, “Evaluate Pressure Drop of Slat Screen in an
Oscillating Fluid in a Tuned Liquid Damper”, Computers and
Fluids 156 (2017) 384–401.
8.
Kifah
Takrouri,
John Luxat and Mohamed Hamed, “Measurement and Analysis of the
Re-wetting Front Velocity during Quench Cooling of Hot
Horizontal Tubes, Nuclear Engineering and Design 311 (2017)
184–198.
9.
Kifah
Takrouri,
John Luxat and Mohamed Hamed, “Experimental Investigation of
Quench and Re-wetting Temperatures of Hot Horizontal Tubes Well
above the Limiting Temperature for Solid–Liquid Contact”,
Nuclear Engineering and Design, 311 (2017) 167–183.
10.
Mohamed S. Hamed, “The Use of Renewable Energy in New and
Existing Buildings,
Keynote Lecture,
International 100% Renewable Energy
Conference, May 18-20, 2017, Istanbul, Turkey.
11.
Mohamed S Hamed,
“Energy Optimization of the Thermal Processing Industry”,
Keynote Lecture,
International Conference on Energy
and Thermal Engineering, 25-28 April 2017, Istanbul, Turkey.
12.
Hassan, A. A. and Hamed, M. S., “Modeling Effective
Thermal Conductivity of Randomly Distributed Loads of Mono-Sized
Parts of Arbitrary Geometry,” Materials Performance and
Characterization, Vol. 5, No. 1, 2016, pp. 1–16,
doi:10.1520/MPC20150031. ISSN 2165-3992.
13.
Omar, A.M.T.,
Hamed, M.S., “Modeling of bubble growth under an impinging free
planar water jet”, ASME Journal of Heat Transfer Engineering,
Vol. 37, Issue 18, 2016.
14.
Ahmed A.B.
and Hamed M.S., “Bubble Dynamics Under an Impinging Jet”, The
12th International Conference on Heat Transfer, Fluid Mechanics
and Thermodynamics, July 11-13, 2016, Malaga, Spain.
15.
Hamda M.
and Hamed M.S., “Bubble Dynamics In Pool Boiling of Nanofluids,
The 12th International Conference on Heat Transfer, Fluid
Mechanics and Thermodynamics, July 11-13, 2016, Malaga, Spain.
16.
Ahmed, A.B.,
and Hamed, M.S., “Modeling of transition boiling under an
impinging water jet”, International Journal of Heat and Mass
Transfer,
Vol. 91,
pp. 1273–1282, 2015.
17.
Ahmed, A.,
and Hamed, M.S., “Experimental
investigation of boiling under planar impingement jet”,
the 9th
International Conference on Boiling and Condensation Heat
Transfer, April 26-30, 2015, Boulder, Colorado, USA.
18.
Almalki, N.A., Hamda, H.,
and Hamed, M.S.,
“On The Effect of Initial Surface Condition on Pool Boiling of
Nanofluids”, the 9th International Conference on Boiling and
Condensation Heat Transfer, April 26-30, 2015, Boulder,
Colorado, USA.
19.
Marivani, M.,
and Hamed, M.S., “Numerical Study of Slat Screen Pattern Effect
on Design Parameters of TLD”, ASME Journal of Fluids
Engineering, Vol. 136, 061201 to 1- 061201-11, 2014.
20.
Jan
, A.,
Hamed, M.S.,
Razaqpur, A., and Foo, S., “Investigation of The Use of Solar
Thermal Buffer Zone in Buildings”, Chapter 80, I. Dincer et al.
(eds.), Progress in Exergy, Energy, and the Environment, DOI
10.1007/978-3-319-04681-5_80, Springer International Publishing
Switzerland, 2014.
21.
Ahmed, A.,
and Hamed, M.S., “Bubble Dynamics Under An Impinging Planar
Water Jet”, The 10th International Conference on Heat Transfer,
Fluid Mechanics and Thermodynamics, 14 – 16 July 2014, Orlando,
Florida, USA.
This paper has won the outstanding paper award in its session.
22.
Oda, T. F., Hamed M.S., and Ghani, S., “Numerical Study of the
Effect of Liquid Sloshing Inside TLD on Suppression of Gust
Wind- Induced Vibration in High Rise Buildings”, The 10th
International Conference on Heat Transfer, Fluid Mechanics and
Thermodynamics, 14 – 16 July 2014, Orlando, Florida, USA.
23.
Ahmed, A.,
and Hamed, M.S., “Water Quenching Heat Transfer”, ASM Handbook,
Volume 4A, Steel Heat Treating Fundamentals and Processes, J.
Dossett and G.E. Totten, editors, ASM International Press, 2013.
24.
Omar, Ahmed M.T., and Hamed, M.S., “A Mechanistic Wall
Heat Flux Partitioning Model of Nucleate Boiling Under Impinging
Jets”, Key Note Presentation, Smart and Green Interfaces ECOST
Workshop, Prague, Czech Republic, March 21-22, 2013.
25.
Jan , A., Hamed, M.S., Razaqpur, A., and Foo, S.,
“Investigation of The Use of Solar Thermal Buffer Zone in
Buildings”, The Sixth International Exergy, Energy, and
Environment Symposium, July 1-4, 2013, Rize, Turkey.
26.
Oda, T. F., Hamed M.S., and Ghani, S., “On the
Damping of Wind–Induced Vibration in Tall Buildings”, The 4th
International Conference on Civil, Structural and Environmental
Engineering Computing, Sept 3-6, 2013, Cagliari, Sardinia,
Italy.
27.
Ahmed, O.,
and Hamed, M.S.,” Effects of Acid Addition on The Heat Transfer
of Nanofluids Pool Boiling”, in Heat Transfer Engineering,
33(14):1148–1155, 2012.
28.
Ahmed, O.,
and Hamed, M.S., “Effect of Nanoparticle Deposition on Pool
Boiling of Nanofluids”, International Journal of Heat and Mass
Transfer, 55, 3423–3436, 2012.
29.
Hassan, A., Baraich, H., Hamed, M.S., and
Abdel-Hady, A., “Effect of Surface Condition on Pool Boiling
of Nanofluids”, 8th ECI International Conference on
Boiling and Condensation, Lausanne, Switzerland, June 3-7, 2012.
30.
Oda, T., Hamed, M.S., and Ghani, S. ”On Wave Breaking
inside Tuned Liquid Dampers”, The 9th International
Conference on Heat Transfer, Fluid Mechanics and Thermodynamics,
Malta, 16-18 July 2012. This
paper has won the “Outstanding Paper Award” in its session.
31.
Hassan, A.
and Hamed, M.S., “Modeling of heat treatment of randomly
distributed loads in multi-zone continuous furnaces”,
Invited Presentation, the 7th International
conference on advanced materials – THERMEC 2011, Quebec City,
Quebec, Canada, August 1-5, 2011.
32.
Takrouri, K,
Luxat, J and Hamed, M.S.,” Experimental investigation of quench
phenomena and two-phase flow behavior for hot horizontal tubes
well above the limiting temperature for solid–liquid contact”,
The 14th International Topical Meeting on Nuclear
Reactor Thermal hydraulics, NURETH-14, Toronto, Ontario, Canada,
September 25-30, 2011.
33.
Takrouri, K,
Luxat, J and Hamed, M.S., “Experimental investigation
of re-wetting of hot horizontal tubes”, The 8th
International Conference on Heat Transfer, Fluid Mechanics and
Thermodynamics, Pointe Aux Piments, Mauritius, July 11-13, 2011.
This paper has been selected as the best paper in the
session.
34.
Jeyakumar, M.,
Ahmed,O., Shankar, S., Hamed,
M.S., “Heat Transfer Coefficient
and Viscosity of Alumina-water Nanofluids”, The 8th
International Conference on Heat Transfer, Fluid Mechanics and
Thermodynamics, Pointe Aux Piments, Mauritius, July 11-13, 2011.
35.
Hassan, A., and Hamed, M.S., "Towards Achieving Vision
2020 Goals of the Heat Treating Industry", the Journal of
Minerals, Metals, and Materials Society (TMS), Vol. 62 No. 9,
pp. 55-59, 2010.
36.
Malik,
M.M.,
Jeyakumar, M., Hamed, M. S., Walker, M. J., Shankar, S.,
"Rotational Rheometry of Liquid Metal Systems: Measurement
Geometry Selection and Flow Curve Analysis", Journal of
Non-Newtonian Fluid Mechanics, 165, pp.733-742, 2010.
37.
M.
Marivani
and Hamed, M.S., "Numerical Modeling of Sloshing Motion in a
Tuned Liquid Damper Outfitted with a Submerged Slat Screen",
Int. Journal of Numerical Methods in Fluids, available on-line
January 12, DOI: 10.1002/fld.2216, 22 pages, 2010.
38.
Jeyakumar, M., Hamed, M.S. and Shankar, S, “Rheology of
Liquid Metals and Alloys”, Journal of
Non-Newtonian Fluid Mechanics, available online,
doi:10.1016/j.jnnfm.2011.04.014,
8 pages. 2010
39.
Wang,
H.,
Shankar, S., and Hamed, M.S.," Optimization of Material
Properties in Solidification Simulation of Al-Si Binary Alloy",
Metallurgical Transactions A, available online, doi:
10.1007/s11661-011-0617-z, 15 pages. 2010.
40.
Wang, H.,
Shankar, S., and Hamed, M.S.," Effect of Shrinkage on Primary
Dendrite Arm Spacing During Binary Al-Si Alloy Solidification",
Metallurgical Transactions A, available online,
doi:10.1007/s11661-011-0611-5, 9 pages. 2010.
41.
Friedrich, K.,
Hamed, M. S., Razaqpur, G., and Foo, S., "Achieving
Sustainable Energy Savings Using Solar Airflow Windows", The 10th
International Conference for Enhanced Building Operations,
Kuwait, 26-28 October, 2010.
42.
Amir H. Nobari;
Vladan Prodanovic; Mohamed S. Hamed; Mary Wells; Matthias
Militzer, “Thermal Behavior of a Hot Moving Steel Plate during
Jet Impingement Cooling”, Materials Science & Technology 2010
Conference & Exhibition ,Houston, Texas, USA, October 17-21,
2010.
43.
Ahmed, O.,
and Hamed, M.S., "On Pool Boiling of Nanofluids", The 7th
International Conference on Heat Transfer, Fluid Mechanics and
Thermodynamics , Antalya, Turkey, 19-21 July 2010 (FRP).
This paper has been selected as the best paper in the session
and has been considered for publication in the International
Journal of Engineering.
44.
Ahmed, O.,
and Hamed, M.S., "Effect of Experimental
Techniques on the Pool Boiling of Nanofluids” , The
International Conference on Multiphase Flow, ICMF-2010, Tampa,
FL, USA, May 30-June 4, 2010.
45.
Omar, A.M.T.,
Hamed, M.S., and Shoukri, M., "Modelling of nucleate boiling
heat transfer under an impinging free jet", International
Journal of Heat and Mass Transfer, Volume 52, Issue 23-24, pp.
5557-5566, 2009.
46.
M. Marivani
and M.S. Hamed, "Numerical Simulation of Structure Response
Outfitted with a Tuned Liquid Damper", Journal of Computers and
Structures, Volume 87, Issues 17-18, pp. 1154-1165, 2009.
47.
Home, D.,
Lightstone, M.F., and Hamed, M.S., ‘Validation of DES-SST based
turbulence model for a fully developed turbulent channel flow
problem’, Numerical Heat Transfer, Part A: Applications, Volume
55, Issue 4, pp. 337 - 361, 2009.
48.
Home, D., Arvanitis, G.,
Lightstone, M.F., and Hamed, M.S, "Simulation of flow pulsations
in a twin rectangular subchannel geometry using unsteady
Reynolds averaged Navier-Stokes modelling", Nuclear Engineering
and Design, 239, pp. 2964–2980, 2009.
49.
Morsy, H., Marivani, M.,
and Hamed, M.S., “On
the Dynamic Response of Structures Equipped with Tuned Liquid
Dampers”, Presented at The Fourth International Conference on
Thermal Engineering Theory and Applications, Abu Dhabi, UAE,
January 12-14, 2009.
50.
Omar, A.M.T.,
Hamed, M.S., and Shoukri, M.,”Prediction of Wall Heat
Flux to an Impinging Free Liquid Jet Using the Concept of Wall
Flux Partitioning”, The Fourth International Conference on
Thermal Engineering Theory and Applications, Abu Dhabi, UAE,
January 12-14, 2009.
51.
Omar, A.M.T.,
Hamed, M.S., Shoukri, M.,"On the Bubble Dynamics Under an
Impinging Free Planar Jet", 7th ECI International
Conference on Boiling Heat Transfer, Florianopolis-SC-Brazil,
3-7 May, 2009.
52.
Srirangam, S.P.,
Malik, M.M., Jeyakumar, M., Walker, M., Hamed,
M.S., Shankar, S., "Effect of Strontium on Viscosity and Liquid
Structure of Al-Si Eutectic Alloy", TMS Annual Meeting &
Exhibition, San Francisco, California, USA, February 15-19,
2009.
53.
Morsy, H., Marivani, M.,
and Hamed, M.S., “On
the Dynamic Response of Structures Equipped with Tuned Liquid
Dampers”, ", Presented at The Fourth International Conference on
Thermal Engineering Theory and Applications, Abu Dhabi, UAE,
January 12-14, 2009.
54.
Takrouri1, K.,
Luxat, J., Hassan, A., and Hamed, M.S., "Heat Transfer and
Two-Phase Flow Behaviour during Quench of Hot Horizontal
Cylindrical Tubes", The Fourth International Conference on
Thermal Engineering Theory and Applications, Abu Dhabi, UAE,
January 12-14, 2009.
55.
Jeyakumar, M., Mousa, M., Hamed, M.S., Shankar, S., "Heat
Treatment of A356.2 Aluminum Alloy: Effect of Quench Rate and
Natural Ageing", TMS Annual Meeting & Exhibition, SAN FRANCISCO,
CALIFORNIA, FEBRUARY 15-19, 2009.
56.
Akmal, M., Omar, A.M.T.,
and Hamed, M.S., “Experimental Investigation of Propagation of
Wetting Front on Curved Surfaces Exposed to an Impinging Water
Jet”, International Journal of Microstructure and Materials
Properties (IJMMP), in press, to appear in Vol. 3, No 2/3, 2008.
57.
Hassan,
A., Hamed, M.S., "Optimization of Energy Utilization and
Productivity of Heat Treating Batch-Type Furnaces", Journal of
ASTM International, in press, to appear in Vol. 5, No. 1, 2008.
58.
Elsaadawy, E., Mortazavi, H., and Hamed, M.S.,
"Turbulence Modeling of Forced Convection Heat Transfer in
Two-Dimensional Ribbed Channels", ASME Journal of Electronic
Packaging, Vol. 130, pp. 031011-1 to -17, September 2008.
59.
Ali,
S.,
Hamed, M.S., and Lightstone, M.F., "Numerical study of the
modeling error in the online input estimation algorithm used for
inverse heat conduction problems (IHCPs), Journal of Physics:
Conference Series, 135, (2008).
60.
Ali, S.,
Hamed, M.S., and Lightstone, M.F., "Numerical study of the
modelling error in the online input estimation algorithm used
for inverse heat conduction problems (IHCPs), Journal of
Physics: Conference Series, v 135, p 012004 (8 pp.), 2008.
61.
Ali, S.,
Hamed, M.S., and Lightstone, M.F., "An Efficient Numerical
Algorithm for the Prediction of Thermal and Microstructure
Fields during Quenching of Steel Rods", Journal of ASTM
International, Volume 5, Issue 10, November 2008.
62.
Home, D.,
Lightstone, M.F., and Hamed, M.S., ‘Numerical investigation of
turbulent flow in a twin rectangular sub-channel geometry’, 32nd
CNS Annual Conference, Toronto, June 1-4, 2008.
63.
S.K. Ali,
M.S. Hamed, and M.F. Lightstone, “Numerical study of the
modeling error in the online input estimation algorithm used for
inverse heat conduction problems (IHCPs)”, The 6th International
Conference on Inverse Problems in Engineering: Theory and
Practice, Dourdan (Paris), France, June 15-19, 2008.
64.
Hongda Wang,
M.S. Hamed, and S. Shankar, “EFFECT OF SHRINKAGE ON Al – Si
ALLOY SOLIDIFICATION”, The Computational Heat Transfer-CH08
Conference, Marrakech, Morocco, May 11-16, 2008.
65.
Home, D.,
Lightstone, M.F., and Hamed, M.S., "Detached Eddy Simulation
Based Turbulence Modeling Approach for Inter Sub-Channel Thermal
Mixing", The 12th International Topical Meeting on Nuclear
Reactor Thermal Hydraulics (NURETH-12),Sheraton Station Square,
Pittsburgh, Pennsylvania, U.S.A. September 30-October 4, 2007.
66.
Omar, M.T.,
Hamed, M.S., and Shoukri, M., "Experimental Study of Steady
State Nucleate Boiling Heat Transfer Under Planar Jet
Impingement", The 12th International Topical Meeting on Nuclear
Reactor Thermal Hydraulics (NURETH-12), Sheraton Station Square,
Pittsburgh, Pennsylvania, U.S.A. September 30-October 4, 2007.
67.
Khafagy, A.E., Chuang, D,
Schweitzer, J., and Hamed, M.S., “Two-Phase Flow inside
Automotive Torque Converters”, the International Conference on
Multiphase Flow, ICMF 2007, Leipzig, Germany, July 9-13, 2007.
68.
Omar, M.T.,
Hamed, M.S., Shoukri, M., "Nucleate Boiling Heat Transfer under
Liquid Jet Impingement", ASME-JSME Thermal Engineering
Conference and Summer Heat Transfer Conference, Vancouver, BC,
Canada, July 8-12, 2007.
69.
Wang, H.,
Shankar, S., and Hamed, M.S., “Numerical model for binary alloy
solidification”, The 5th International Conference on
Computational Heat and Mass Transfer (ICCHMT), Canmore, Alberta,
Canada, June 18-22, 2007.
70.
Hassan, A., Curtis, C., Hamed, M.S., and Shoukri,
M., “How to Load a Batch-Type Furnace”, TMS 2007 Annual Meeting,
February 25-March1, Orlando, Florida, 2007.
71.
Malik, M.M.,
Lambotte, G., Hamed, M.S., Chartrand, P., and Shankar,
S., “How to measure viscosity of liquid aluminum alloys”, TMS
2007 Annual Meeting, February 25-March1,Orlando, Florida, 2007.
72.
Wang, H.,
and Hamed, M.S, ”Flow Mode-transition of Natural Convection in
Inclined Rectangular Enclosures Subjected to Bidirectional
Temperature Gradients”, Int. Journal of Thermal Sciences, Vol.
45, pp. 782-795, 2006.
73.
Siddique, M.R., Hamed, M.S., and El Damatty, A.A., “A nonlinear
numerical model for sloshing motion in tuned liquid dampers”,
Int. Journal of Numerical Methods in Heat and Fluid Flow, Vol.
15, No. 3, pp. 306-324, 2005.
74.
Hamed, M.S., and Akmal, M., and,
“Determination of Heat Transfer Rates in Industry-Like Spray
Quench System with Multiple Impinging Water Jets”, Int. J. of
Materials & Production Technology (IJMPT), Vol. 24, pp. 184-198,
2005.
75.
Wang, H.,
and Hamed, M.S, ”Flow mode-transition of natural convection in
inclined complex enclosures”, WIT Transactions on Modeling and
Simulation, Vol. 41, 2005.
76.
Wang, H.,
and Hamed, M.S, “Flow mode-transition of natural convection in
inclined complex enclosures”, submitted to 12th
international conference on computational methods and
experimental measurements, CMEM05, Malta, June 20-22, 2005.
77.
Chen, Y.,
Brooks, G., Nightingale, S., Coley, K., and Hamed, M.,
“Marangani effect in refractory slag line dissolution”, 4th
Int. Symposium on Advances in Refractories for the Metallurgical
Industries, 43rd Annual Conference of Metallurgists
of CIM, Hamilton, Ontario, August 22-24, 2004.
78.
Wang, H.,
and Hamed, M.S., “Effect of side wall thermal conditions on
natural convection in inclined enclosures”, 12th Annual
Conference of the CFD Society of Canada, Heat Transfer I, pp.
262-269, Ottawa, Ontario, May 9-12, 2004. This paper has
won the first prize among 29 papers entered the conference
student-paper competition.
79.
Hamed, M. S., and J. M. Floryan, “Maragoni convection –
the case of a cavity subject to point heating”, Journal of Fluid
Mechanics, Vol. 405, pp. 79-110, 2000.
80.
Hamed, M. S., and J. M. Floryan, “Maragoni convection –
the case of a cavity with differentially heated side walls”,
Journal of Fluid Mechanics, vol. 405, pp. 111-129, 2000.
81.
Hamed, M. S., and J. M. Floryan, “Numerical simulation of
unsteady non-isothermal capillary interfaces”, Journal of
Computational Physics, Vol. 145, pp. 110-140, 1998.
